Ring lock system is connection consists of standards with rosettes every 0.5mm And horizontal members with a cast end captive wedge (horizontal / Transom) When connected together the ledger ends and rosettes create a very stronger Connection .it is this connection the transmits force throughout the scaffold structures The ring lock rosette has been manufactured to have 8 holes, 4 of which are small And 4 are large. The smaller holes represent the 90 degree angle at which Horizontal And transom are fitted. the large hole accommodate the diagonal bay brace and horizontal at variable angles The rosette also allows for the horizontal to be connected into the large holes which gives Up to 15 degree of move ability
Standard with spigot are the vertical member of Ring lock scaffolding that utilize a removable spigot. The standard provide the vertical support for scaffolding
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring Lock Standard | 1 MTR | 5 kg |
| 2 | Ring Lock Standard | 1.5 MTR | 7.5 kg |
| 3 | Ring Lock Standard | 2 MTR | 10 kg |
| 4 | Ring Lock Standard | 2.5 MTR | 12.5 kg |
| 5 | Ring Lock Standard | 3 MTR | 15 kg |
Horizontal are the member of Ring lock scaffolding .They provide horizontal support for load and planks ledger can also used as mid rail and top or hand guard rails
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock horizontal | 1 MTR | 4.8 kg |
| 2 | Ring lock horizontal | 1.5 MTR | 6.6 kg |
| 3 | Ring lock horizontal | 2 MTR | 8.5 kg |
| 4 | Ring lock horizontal | 2.5 MTR | 10.3 kg |
| 5 | Ring lock horizontal | 3 MTR | 12.1 kg |
The truss ledger has been designed to enable higher service loads to be applied to the scaffold Than could be applied to regular ledger. The reinforcing tube and stiffener plates supports the Top tube and provide strength while maintaining lightness
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock Truss Ledger | 1.57 MTR | 10.39 kg |
| 2 | Ring lock Truss Ledger | 1.82 MTR | 14.95 kg |
| 3 | Ring lock Truss Ledger | 2.13 MTR | 17.34 kg |
| 4 | Ring lock Truss Ledger | 2.43 MTR | 20.44 kg |
| 5 | Ring lock Truss Ledger | 3.05 MTR | 21.61 kg |
Diagonal bracing are used for the lateral bracing of ring lock scaffolding . Diagonal brace can also be used as obtuse angle mid rail and top or hand Guard rails in conjunction with stair system
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock bracing | 3 MTR | 7.91 kg |
| 2 | Ring lock bracing | 3.7 MTR | 8.10 kg |
| 3 | Ring lock bracing | 4 MTR | 8.27 kg |
| 4 | Ring lock bracing | 5 MTR | 8.71 kg |
| 5 | Ring lock bracing | 6 MTR | 9.23 kg |
Metal plank are side by side to form the working platform. The number Of metal plank used determines the width of the platform they span the Ledger of the hook on to the supporting ledger/transom there is an antilock System to prevent uplift in adverse condition
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock Metal plank | 1.5 MTR | 8.9 kg |
| 2 | Ring lock Metal plank | 1.8 MTR | 10.5 kg |
| 3 | Ring lock Metal plank | 2.5 MTR | 13.8 kg |
| 4 | Ring lock Metal plank | 2 MTR | 11.5 kg |
| 5 | Ring lock Metal plank | 3 MTR | 16.5 kg |
The base jack is used as a staring base for a scaffold. It is adjustable in height To allow for compensation on uneven surface so that level scaffold is always attainable
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock base jack | 0.35 MTR | 2.4 kg |
| 2 | Ring lock base jack | 0.45 MTR | 3.1 kg |
| 3 | Ring lock base jack | 0.6 MTR | 4.5 kg |
| 4 | Ring lock base jack | 0.65 MTR | 4.7 kg |
| 5 | Ring lock base jack | 6 MTR | 9.23 kg |
The base collar is the beginning vertical member of the ring lock scaffolding system. Its sits upon a fixed or adjustable base
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock base collar | 0.3mtr | .350 kg |
| 2 | Ring lock base collar | 0.6mtr | .650Kg |
The ring lock transom fits vertically between two ledgers positioned 0.5m apart and attached With half coupler. When positioned at mid or third points between two ledger the maximum Point load capacity is increased
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock transom | 0.50mtr | 3.4 kg |
| 2 | Ring lock transom | 0.50mtr | 3.4 kg |
Swivel brace are used for the lateral bracing modular scaffolding Swivel brace can also be used as obtuse angle mid rail and top or hand Guard rails in conjunction with stair system .swivel brace give more Versatility to attach the brace to any location on the vertical member Of the scaffold
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock swivel brace | 1.52 mtr | 7.25 kg |
| 2 | Ring lock swivel brace | 2.13 mtr | 10.1 kg |
| 3 | Ring lock swivel brace | 2.43 mtr | 10.67 kg |
| 4 | Ring lock swivel brace | 3.04 mtr | 11.9 kg |
Straight ladder are designed to attached to the inside or outside of scaffold Tower providing safe access to the various deck levels
| S.NO | Description | Meters | Weight |
|---|---|---|---|
| 1 | Ring lock straight ladder | 0.91 mtr | 6 kg |
| 2 | Ring lock straight ladder | 1.52 mtr | 10 kg |
